Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec VC 150 E
Summary of Contents for Trotec VC 150 E
- Page 1 VC 150 E / VC 155 E OPERATING MANUAL VACCUM CLEANER...
-
Page 2: Table Of Contents
Follow the manual • Do not use the device with wet or damp hands. Information marked with this symbol indicates that the operating manual must be observed. vaccum cleaner VC 150 E / VC 155 E... - Page 3 • Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. vaccum cleaner VC 150 E / VC 155 E...
- Page 4 Keep a sufficient distance from heat sources. Note If you store or transport the device improperly, the device may be damaged. Note the information regarding transport and storage of the device. vaccum cleaner VC 150 E / VC 155 E...
-
Page 5: Information About The Device
• 1 x Power adapter • 1 x Upholstery and furniture brush • 1 x Crevice nozzle • 1 x Electrical floor nozzle • 1 x Extension pipe • 1 x Deposit station • 1 x Manual vaccum cleaner VC 150 E / VC 155 E... -
Page 6: Transport And Storage
When the device is not being used, observe the following storage conditions: • dry and protected from frost and heat • Ambient temperature below 45 °C • protected from dust and direct sunlight vaccum cleaner VC 150 E / VC 155 E... -
Page 7: Start-Up
2. Position the device in the fixture of the deposit station (8). 3. Plug the barrel-type connector of the supplied power adapter (13) into the power adapter socket (19) located beneath the motor housing. vaccum cleaner VC 150 E / VC 155 E... - Page 8 ð The device may now be used with the connected nozzle 3. Mount the desired nozzle on the extension pipe (12). attachment. vaccum cleaner VC 150 E / VC 155 E...
-
Page 9: Operation
2. Ensure that the extension pipe (12) is attached correctly to the device holder (23). ð The operating control lamp / battery level indication (2) is illuminated. ð The device is switched on and operating. vaccum cleaner VC 150 E / VC 155 E... -
Page 10: Errors And Faults
• Store the device according to the Storage chapter. interrupted air flow causes motor overheating. Remove potential blockages and do not vacuum any large objects. Info Wait for at least 10 minutes before switching the device back on. vaccum cleaner VC 150 E / VC 155 E... -
Page 11: Maintenance
• Dry the device with a soft, lint-free cloth. • Keep the connecting terminals on the device and charger clean. • Keep the ventilation openings free from dust deposits to prevent overheating of the motor. vaccum cleaner VC 150 E / VC 155 E... - Page 12 "UNLOCK" direction. Empty the collection container (15) and clean the cyclone unit (27) and the HEPA filter (28) after every use so as not to reduce the device efficiency and to prevent motor overload. vaccum cleaner VC 150 E / VC 155 E...
- Page 13 ü The device is switched off. 1. Dismount the covers (30) from both sides of the two air outlet filters (7) by turning them in counter-clockwise direction and removing them. vaccum cleaner VC 150 E / VC 155 E...
-
Page 14: Disassembly
5. Insert the latch (31) and close it again until it engages audibly. 5. Dispose of the battery and the device as described in the Disposal chapter. vaccum cleaner VC 150 E / VC 155 E... -
Page 15: Technical Annex
Note: The position numbers of the spare parts differ from those Technical annex describing the positions of the components mentioned in these instructions. Overview of spare parts vaccum cleaner VC 150 E / VC 155 E... -
Page 16: Disposal
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. vaccum cleaner VC 150 E / VC 155 E... - Page 17 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...