Page 2
Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark components. The safety features of some parts may not always be obvious. Lexmark is not responsible for the use of other replacement parts.
Click View User's Guide (including Setup Troubleshooting). Click Yes. An icon of the User's Guide appears on your desktop, and the User's Guide appears on the screen. You can also find this document on the Lexmark Web site at www.lexmark.com. Lexmark Run, and then type...
The Help gives you instructions for using the software, if your printer connects to a computer. Lexmark Solution Center Description The Lexmark Solution Center software is included on your CD. It installs with the other software, if your printer connects to a computer. Customer support...
12 months after the original date of purchase. Record the following information (located on the store receipt and the back of the printer), and have it ready when you contact us so that we may serve you faster: •...
Select the first and last photos in a range to be printed. Using the Transfer menu You can transfer photos from a memory card to a flash drive or a computer (if the printer is attached to a computer). The photos on the memory card are retained.
Country to set the default blank paper size and date format being used in your location. • Power Save to set the length of time before the printer, if left unused, enters a low power state. During Power Save, the display and backlight will be turned off. Press any button to restore power to the printer.
Select a style and color to frame a photo. Using the PictBridge menu The PictBridge default settings menu allows the selection of printer settings if no selections were specified on your digital camera beforehand. To make camera selections, see the camera documentation.
Power button is not lit Make sure you have disconnected the power supply cord from the printer and then from the wall outlet. Plug the cord all the way into the power supply port on the printer.
OLUTION Check the USB cable for any obvious damage. Firmly plug the square end of the USB cable into the back of the printer. Firmly plug the rectangular end of the USB cable into the USB port of the computer.
Remove the memory card or the flash drive from the printer. Removing and reinstalling the software If the printer is not functioning properly, or if a communications error message appears when you try to use the printer, you may need to remove and reinstall the printer software.