Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Faro Manuals
  4. Racks & Stands
  5. ACCSS8031
  6. Installation manual

Faro ACCSS8031 Installation Manual

Hide thumbs Also See for ACCSS8031:

Advertisement

Quick Links

Download this manual
Tripod Quick Release Mount Installation for the Focus Laser Scanner
Overview
®
The FARO
Laser Scanner Quick Release allows you to easily attach and detach the laser scanner from your tripod.
Using the steps in this article you can install the quick release components to the scanner and tripod. Different models
have been produced by FARO, refer to the section below that matches your unit.
Tripod Quick Release Mount (ACCSS8031)
Gather Parts & Tools
The Quick Release Package (FARO Part #: ACCSS8031)
comes with the following components.
• 1 x Part A - Scanner Mount (Focus)
• 1 x Part B - Coupling (with int. 5/8" thread)
• 1 x Part C - Base Plate w/Graduated Dial
• 1 x Part D - Thread Adapter 5/8" to 3/8" (shipped pre-
installed into Part B)
• 1 x Hex Key (4 mm)
Attach the Scanner Mount to the Bottom of
the Scanner
1. Verify that all four hooks on the Scanner Mount (A)
are in their fully retracted position. If necessary,
using the provided hex key, loosen the screws until
the hooks are in the correct position as shown below.
https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner
Updated: Wed, 12 Oct 2022 22:14:00 GMT
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the ACCSS8031 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Faro ACCSS8031

Summary of Contents for Faro ACCSS8031

  • Page 1 Laser Scanner Quick Release allows you to easily attach and detach the laser scanner from your tripod. Using the steps in this article you can install the quick release components to the scanner and tripod. Different models have been produced by FARO, refer to the section below that matches your unit. Tripod Quick Release Mount (ACCSS8031) Gather Parts &...
  • Page 2 1. Verify the mounting stud of the tripod is a 3/8 thread. If the mounting stud is a 5/8 thread, the Thread Adapter (D) should be removed from the Coupling (B) using the provided 4mm hex key. 2. Place and center the Base Plate w/Graduated Dial (C) onto the tripod platform. https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner Updated: Wed, 12 Oct 2022 22:14:00 GMT...
  • Page 3 4. Check that the base plate is securely attached to the tripod platform. Attach Base Plate to Tripod (ACCSS8032) 1. Before attaching the mount to the tripod baseplate, remove the protective covering from the tripod baseplate screw. https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner Updated: Wed, 12 Oct 2022 22:14:00 GMT...
  • Page 4 2. Holding the scanner above the tripod, lower the scanner onto the tripod over the Coupling (B). 3. Rotate the scanner to orient it relative to the location you want to scan. 4. Tighten the thumbscrew until the scanner is securely locked onto the tripod. https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner Updated: Wed, 12 Oct 2022 22:14:00 GMT...

  • Page 5: Additional Tips

    2. Periodically check the tightness of the quick release on the tripod. 3. Never force the laser scanner to turn without releasing the thumb screw. 4. Remove the laser scanner before moving the tripod. To Achieve Stability and Rigidity https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner Updated: Wed, 12 Oct 2022 22:14:00 GMT...

  • Page 6: Windy Conditions

    Windy Conditions FARO recommends the use of the ACCSS8032 tripod (with the Focus scanner) in winds less than 35mph (56km/h). In stronger winds, it may be required to use a heavier aftermarket surveyor type tripod. See the following guidelines to maximize stability of your FARO tripod in windy conditions.
  • Page 7 • Tripod legs must be opened to the side at the maximum in first horizontal lock position. It’s possible to lock the legs in wider horizontal position but this will dramatically limit the scanner height and make the setup less resistant against vibration. https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner Updated: Wed, 12 Oct 2022 22:14:00 GMT...
  • Page 8 Media, iframe, embed and object tags are not supported inside of a PDF. Prepare Time to Complete 20 minutes Items Needed • Laser Scanner Quick Release package—FARO Part #: ACCSS8008 ® • FARO Focus ® •...
  • Page 9 1. Order the Quick Release Package from FARO Sales. Laser Scanner Quick Release package—FARO Part #: ACCSS8008 2. When you receive the package, verify you have these parts. a. 1 Base Plate attaches to the tripod platform (item 1 in the picture) b.
  • Page 10 2. Install the base plate on the tripod platform by threading the base plate 3/8" center hole onto the tripod platform 3/ 8" threaded stud. The two parts should fit flush against each other. Twist the base plate in a clockwise direction, securing it snuggly to the platform. https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner Updated: Wed, 12 Oct 2022 22:14:00 GMT...
  • Page 11 4. Tighten the base plate set screw using the 3 mm silver hex key inserted into the recess at the center of the set screw. 5. Check that the base plate is securely attached to the tripod platform and is unable to spin in any direction. https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner Updated: Wed, 12 Oct 2022 22:14:00 GMT...
  • Page 12 4. Holding the silver key firmly in the hole in the inner ring, tighten the central 3/8" screw with the black key. Do not let the silver key have any leverage while you are tighten the central screw. https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner Updated: Wed, 12 Oct 2022 22:14:00 GMT...
  • Page 13 3. With the scanner contacting the base plate, turn the scanner to orient it relative to the location you want to scan. 4. On the scanner mount plate, rotate the outer ring until the scanner is securely locked onto the tripod. https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner Updated: Wed, 12 Oct 2022 22:14:00 GMT...
  • Page 14 If any latches are loose, spread the legs slightly until the latches cannot be wiggled. This ensures that the tripod is firmly planted on the ground, and unlikely to shake or vibrate during scanning. https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner Updated: Wed, 12 Oct 2022 22:14:00 GMT...

  • Page 15: Troubleshooting

    (Step 4). Tripod Quick Release Mount (ACCSS6040) Video In this 3-minute YouTube video tutorial, learn how to unpack and set up the FARO Focus3D Laser Scanner on the https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner Updated: Wed, 12 Oct 2022 22:14:00 GMT...
  • Page 16 Media, iframe, embed and object tags are not supported inside of a PDF. Prepare Time to Complete 10 minutes • Focus3D Panorama Tripod Quick Release package, FARO Part #: ACCSS6040, Manufacturer Part #: 100200 Items Needed • Laser Scanner Carbon Fiber Tripod, FARO Part #: ACCSS6005 •...
  • Page 17 4. Insert and tighten the four screws with the included hex wrench; do not over tighten. 5. To install the lower tripod mounting ring, first remove the 5/8-inch screw from the tripod using reasonable torque. https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner Updated: Wed, 12 Oct 2022 22:14:00 GMT...
  • Page 18 8-inch screw and tighten until snug with the included hex wrench. Make sure that the numbers on the tripod mounting ring are right-side up. 8. Once the tripod mounting ring is secure, place the scanner on the tripod. https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner Updated: Wed, 12 Oct 2022 22:14:00 GMT...

  • Page 19: Next Steps

    Focus3D. Troubleshooting If you cannot remove the screw in steps 5 and 6, do not apply excessive force as it may damage the tripod. Instead, contact FARO Support for instructions. https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner Updated: Wed, 12 Oct 2022 22:14:00 GMT...