Table of Contents
Advertisement
Quick Links
Tripod Quick Release Mount (ACCSS8031) Installation for the Focus M
and S Series
Overview
®
The FARO
Laser Scanner Quick Release (FARO Part #: ACCSS8031) allows you to easily attach and detach the laser
scanner from your tripod. Using the steps in this article you can install the quick release components to the scanner and
tripod. Once the components are installed, just lower the scanner onto the tripod base plate, turn the scanner to orient it
relative to what you want to scan, and tighten the thumbscrew to lock the scanner to the tripod.
Gather Parts & Tools
The Quick Release Package (FARO Part #: ACCSS8031)
comes with the following components.
• 1 x Part A - Scanner Mount (Focus)
• 1 x Part B - Coupling (with int. 5/8" thread)
• 1 x Part C - Base Plate w/Graduated Dial
• 1 x Part D - Thread Adapter 5/8" to 3/8" (shipped pre-
installed into Part B)
• 1 x Hex Key (4 mm)
https://knowledge.faro.com/Hardware/3D_Scanners/Focus/Tripod_Quick_Release_Mount_-ACCSS8031-_Installation_for_the...
Updated: Fri, 20 Aug 2021 23:27:26 GMT
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Faro ACCSS8031
Summary of Contents for Faro ACCSS8031
- Page 1 The FARO Laser Scanner Quick Release (FARO Part #: ACCSS8031) allows you to easily attach and detach the laser scanner from your tripod. Using the steps in this article you can install the quick release components to the scanner and tripod.
- Page 2 1. Verify the mounting stud of the tripod is a 3/8 thread. If the mounting stud is a 5/8 thread, the Thread Adapter (D) should be removed from the Coupling (B) using the provided 4mm hex key. https://knowledge.faro.com/Hardware/3D_Scanners/Focus/Tripod_Quick_Release_Mount_-ACCSS8031-_Installation_for_the… Updated: Fri, 20 Aug 2021 23:27:26 GMT...
- Page 3 4. Check that the base plate is securely attached to the tripod platform. Attach Base Plate to Tripod (ACCSS8032) 1. Before attaching the mount to the tripod baseplate, remove the protective covering from the tripod baseplate screw. https://knowledge.faro.com/Hardware/3D_Scanners/Focus/Tripod_Quick_Release_Mount_-ACCSS8031-_Installation_for_the… Updated: Fri, 20 Aug 2021 23:27:26 GMT...
- Page 4 2. Holding the scanner above the tripod, lower the scanner onto the tripod over the Coupling (B). 3. Rotate the scanner to orient it relative to the location you want to scan. https://knowledge.faro.com/Hardware/3D_Scanners/Focus/Tripod_Quick_Release_Mount_-ACCSS8031-_Installation_for_the… Updated: Fri, 20 Aug 2021 23:27:26 GMT...
- Page 5 2. Periodically check the tightness of the quick release on the tripod. 3. Never force the laser scanner to turn without releasing the thumb screw. 4. Remove the laser scanner before moving the tripod. https://knowledge.faro.com/Hardware/3D_Scanners/Focus/Tripod_Quick_Release_Mount_-ACCSS8031-_Installation_for_the… Updated: Fri, 20 Aug 2021 23:27:26 GMT...
- Page 6 Heat Protection Cover and Manual for the Focus M70 and S70/S150/S350 • Focus3D Panorama Tripod Quick Release Mount Installation Keywords: quick release adapter, setup, install, unpack, quick release appliance, quick release attachment https://knowledge.faro.com/Hardware/3D_Scanners/Focus/Tripod_Quick_Release_Mount_-ACCSS8031-_Installation_for_the… Updated: Fri, 20 Aug 2021 23:27:26 GMT...
Need help?
Do you have a question about the ACCSS8031 and is the answer not in the manual?
Questions and answers