Advertisement
Draining remaining water
1. While clean water is circulating from the spray bar,
wipe the walls and bottom of reservoir until clean.
2. Turn off the regulator (C) to the diaphragm pump
(D).
3. Allow the remaining reservoir water to drain by turn-
ing off water supply valve (G) or (K).
4. Close reservoir drain valve (F).
310623A
5. Close both valves (G) and (K) that isolate both recir-
culating filters.
6. Remove the filter housings (N) and screen elements
112302.
7. Clean and inspect screen elements. Reinstall into
filter housings or replace if elements are dam-
aged.See Parts, page 8, for replacement part num-
bers.
Use extra care to ensure that the element screens
are round and properly seated in the housing
counterbore.
Maintenance
7
Advertisement
