Kenmore 790.9010 Series Use & Care Manual page 21

Oven Cleaning
FEATURE OVERVIEW
• Self-Cleaning Cycle
To start the Self-Clean Cycle
*We recommend a 2 hour self-clean cycle for light soils and a 3 hour cycle for average to heavy soils.
INSTRUCTIONS
To Set the Controls for a Self-Clean Cycle:
1. Be sure the clock shows the correct time of day, and the door is closed.
2. Push . "— — —" appears in the display.
3. Push the until "3:00" appears in the display for a 3 hour cycle, or
push the until "2:00" appears in the display for a 2 hour cycle.
4. As soon as the or
closing, the "Locked" indicator light will flash and "CLN" appears in the
display; after approximately 10 seconds, "DR" and "CLN" will show in
the display and three beeps will sound when the cleaning cycle starts.
Do not open the door while the light is flashing (it takes about 15
seconds for the lock to close). When the light stops flashing the door is
locked.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle:
1. Push .
2. Once the oven has cooled down and the "LOCKED" light has gone out,
the oven door can be opened.
When the Self-Clean Cycle is Completed:
1. The time of day will appear in the display window and the "LOCKED"
light will continue to glow.
2. Once the oven has cooled down and the "LOCKED" light has gone out,
the oven door can be opened.
Do not force the oven door open. This can damage the
automatic door locking system. Use caution when opening the door after
the self-cleaning cycle is completed; the oven may still be very hot.
is released, the motor driven lock will start
21
PRESS DISPLAY
or