Related Manuals for WatchOvers WG13
Summary of Contents for WatchOvers WG13
- Page 1 WatchOvers.com WG13 4G & Wi-Fi Alarm System Users Manual Users Manual WG13 Alarm & Keypad 04 04 2022...
- Page 2 Quick set up Guide and also read our User’s Manual first before use. The WatchOvers WG13 4G & Wi-Fi Alarm System is a dual network system that utilises both Wi-Fi (2.4GHz) and 4G cellular (GSM).
- Page 3 Set the Base Station in Home arm mode to disarm your interior sensors, while keeping your exterior sensors armed. This will arm the sensors other than the sensors you have set as Users Manual WG13 Alarm & Keypad 04 04 2022...
-
Page 4: Settings Explained
Tap on Exit delay to change the amount of delay time you have to leave your home; choose how many seconds you wish to delay the alarm setting and remember to confirm so that the new setting is saved. Users Manual WG13 Alarm & Keypad 04 04 2022... - Page 5 SMS and will inform the persons that the alarm has been triggered with an SMS message. The SMS will be sent to all contact numbers added to this list. maximum of 5 contact numbers can be added. Users Manual WG13 Alarm & Keypad 04 04 2022...
-
Page 6: App Features
“Disarm” the alarm for security reasons. • Offline Notification – Tap to change the setting to On if you wish to receive notifications if the device goes offline for a period of more than 30 minutes. Users Manual WG13 Alarm & Keypad 04 04 2022... - Page 7 4. Anyone who has the App on their mobile phone that you have shared the alarm with will receive a notification through the app on their phone. The notification will advise what sensor has been triggered. Users Manual WG13 Alarm & Keypad 04 04 2022...
- Page 8 About the Keypad Sleep/Wake mode To save the battery, the keypad goes into sleep mode within 20 seconds of non-use. Touch any button to wake the keypad. Users Manual WG13 Alarm & Keypad 04 04 2022...
- Page 9 STEP 3. Enter the new 4-digit user passcode, then press √. Setting Admin Passcode STEP 1. Enter the admin passcode then press √. STEP 2. Press 9 then press √. STEP 3. Enter the new 4-digit admin passcode, then press √. Users Manual WG13 Alarm & Keypad 04 04 2022...
-
Page 10: Smoke Alarm
With the bracket attached to the back of the keypad, slide the bracket up and down 10 times which slides the tamper switch underneath the bracket, this will restart and reset the keypad. Smoke Alarm Users Manual WG13 Alarm & Keypad 04 04 2022... - Page 11 Emission Distance: open > 120m Working Temperature: -10 °C*-+50 °C Interface Temperature of Air: 10%-90%RH Alarm Sound: 275dB Outer Size: 113*45mm Battery Life: 1 – 2 years Reference Standard: EN 14604-2005 Users Manual WG13 Alarm & Keypad 04 04 2022...
-
Page 12: Carbon Monoxide (Co) Alarm
4. Changes in environmental conditions, or tampering can affect the performance of this product. Users are advised to take all necessary precautions for his/her safety and the protection of the property. Users Manual WG13 Alarm & Keypad 04 04 2022... - Page 13 When the LED indicate light flashes, it means it is in the low voltage. LED Indicate Light Two Sensors For installation instructions go to our Quick Set Up Guide Note: This device must be paired with our base station to operate. Users Manual WG13 Alarm & Keypad 04 04 2022...
- Page 14 Connection: Wifi Battery life: 1 year Battery Type: Sealed in Lithium battery (Non-replaceable) User app: Smart Life (multiple users) Connectivity: Wireless (range 60 to 100 metres in open space) Strap Material: Silicone Users Manual WG13 Alarm & Keypad 04 04 2022...
- Page 15 Connection: Wi-Fi Battery life: 1 year Battery Type: Sealed in Lithium battery (Non-replaceable) User app: Smart Life (multiple users) Connectivity: Wireless (range 60 to 100 metres in open space) Strap Material: Silicone Users Manual WG13 Alarm & Keypad 04 04 2022...
Need help?
Do you have a question about the WG13 and is the answer not in the manual?
Questions and answers