Download
Share
Print this page
  1. Manuals
  2. Brands
  3. COVERPRO Manuals
  4. Tent
  5. 58741
  6. Owner's manual & safety instructions

COVERPRO 58741 Owner's Manual & Safety Instructions

Hide thumbs

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
TO PREVENT SERIOUS INJURY:
Do not start or operate any internal combustion
engine inside or near Portable Garage.
Email our technical support at: predator@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Vehicle not included
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
22f

Advertisement

loading
Need help?

Need help?

Do you have a question about the 58741 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for COVERPRO 58741

Summary of Contents for COVERPRO 58741

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    Read the manual before Double Insulated set-up and/or use. WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved safety goggles with side shields. Page 2 Page 2 For technical questions, please call 1-888-866-5797. For technical questions, please call 1-888-866-5797. Item 58741 Item 58741...

  • Page 3: Important Safety Information

    Harbor Freight Tools for a replacement. 5. Do not allow snow, rainwater or debris to accumulate or pool on cover. SAVE THESE INSTRUCTIONS. Item 58741 Item 58741 For technical questions, please call 1-888-866-5797. For technical questions, please call 1-888-866-5797. Page 3...

  • Page 4: Specifications

    Finger tighten all connections until assembly is done. Assemble on a flat, level surface. Frame Assembly Overview Page 4 For technical questions, please call 1-888-866-5797. Item 58741...
  • Page 5 Parts (11) and (7) are top bend connectors for the roof ridge, and have a sloping bend. When installed, the welded socket for the cross rail must be below the bend. DOWN Figure B: Connector Differences DOWN Diagram C Item 58741 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 6. Make sure all parts assembled up to this point are firmly joined together. Tap parts together gently with a rubber mallet (sold separately) if needed. 7. Fully tighten all nuts on the Roof Frame assembly with a wrench (sold separately). Page 6 For technical questions, please call 1-888-866-5797. Item 58741...
  • Page 7 Tighten Nut securely. 3. Install Center Legs and Corner Legs into the Side Connectors (see Figure F). 4. Repeat to assemble the other side. Figure F: Installing Legs Item 58741 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 5. Once diagonal measurements are equal, check the width again to ensure all widths are equal at 12 ft. Note: If measurements cannot be made correct, then parts may not be seated together properly. 11' 10" 11' 10" Figure G: Verify and Adjust for Frame Squareness Page 8 For technical questions, please call 1-888-866-5797. Item 58741...
  • Page 9 To Release a Ratchet Tie-Down: 1. Press spring-loaded bar on handle. 2. Open Ratchet handle completely. 3. Unwind the strap. Figure J: Inserting Hook into Corner Leg Figure L: Releasing Ratchet Item 58741 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 • Be sure the overlap of the door flap remains square over the end frame and reaches the ground at the base. Strap Figure N: Securing Door Panel 7. Repeat above process to install other Door Panel to opposite end of frame. NOTE: DO NOT OVERTIGHTEN RATCHETS. Page 10 For technical questions, please call 1-888-866-5797. Item 58741...
  • Page 11 (Refer to Using Ratchet Tie Downs on page 9). 6. Slide Bottom Rails (5) into pockets. See Figure P. Figure P: Installing Bottom Rails into Pockets Item 58741 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 Install the Butterfly Cleat (28) using the two provided 4 x 32 Screws (30). Note: Butterfly Cleat shown attached to left side but may be attached to either side of Garage. Cross Rail 8" Second Leg Tube Figure S: Installing Butterfly Cleat Page 12 For technical questions, please call 1-888-866-5797. Item 58741...
  • Page 13 Figure W: Routing Door Rope, Step 2 Butterfly 7. Holding both Ropes together, Cleat pull to roll up Door to desired height, then tie to Butterfly Cleat to secure. Figure X: Tying Door Rope Inside Garage Item 58741 For technical questions, please call 1-888-866-5797. Page 13...

  • Page 14: Maintenance

    1. Immediately remove any accumulated debris from the cover with a broom, mop, or other soft-sided instrument from the outside. DO NOT use sharp instruments. 2. PERIODICALLY, clean cover with mild soap and water. DO NOT use bleach or harsh abrasive products. Page 14 For technical questions, please call 1-888-866-5797. Item 58741...
  • Page 15 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175445667 when ordering parts. Item 58741 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Parts List And Diagram

    3-Way Side Connector - Right 4-Way Side Connector 3-Way Peak Connector Foot Plate 4-Way Cover Rail Clamp 3-Way Cover Rail Clamp Anchor, 27" Cable, 1' (30cm) Cable Clamp Bolt, M6 x 50 (not shown) Page 16 For technical questions, please call 1-888-866-5797. Item 58741...
  • Page 17 Door Tube, male (not shown) Pulley Butterfly Cleat Door Rope Screw, 4 x 32 (not shown) Bit, PH2 (not shown) *Item 21 of M6 Nuts, 38 are used plus one is a spare. Item 58741 For technical questions, please call 1-888-866-5797. Page 17...
  • Page 18 Assembly Diagram Page 18 For technical questions, please call 1-888-866-5797. Item 58741...
  • Page 19 Assembly Diagram (continued) Item 58741 For technical questions, please call 1-888-866-5797. Page 19...

  • Page 20: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.