Download Print this page

COVERPRO 63297 Owner's Manual & Safety Instructions

10 ft. x 10 ft. portable shed

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: predator@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2016 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
WARNING! Do not start or operate any internal
combustion engine inside or near Shed.
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 17a

Advertisement

loading
Need help?

Need help?

Do you have a question about the 63297 and is the answer not in the manual?

Questions and answers

Summary of Contents for COVERPRO 63297

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
  • Page 2: Table Of Contents

    Risk of Respiratory Injury. assembly and/or use. Operate engine OUTSIDE and far away from windows, doors, and vents. WARNING marking concerning Risk of Head Injury. Wear hard hat during assembly and service. Page 2 For technical questions, please call 1-888-866-5797. Item 63297...
  • Page 3: Safety

    Do not use grill, heater, These carry important safety information. or ignition sources inside or near cover. If unreadable or missing, contact Harbor Freight Tools for a replacement. SAVE THESE INSTRUCTIONS. Item 63297 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4: Specifications

    Make sure all parts seat completely and securely. A rubber mallet (sold separately) can be used to gently tap parts in place to ensure a tight fit. 1. Lay out Roof parts. Page 4 For technical questions, please call 1-888-866-5797. Item 63297...
  • Page 5 2. Assemble two Center Legs by attaching four Corner Feet (3) to four Legs (1). two Center Feet (2) to two Legs (1). Leg (1) Leg (1) Corner Center Foot (3) Foot (2) Item 63297 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 M6x40 (17), Washers (18) and Nuts (16). Center Corner Bottom Rail (6) Bottom Rail (6) Bolt Corner Center (17) Clamp (13) Clamp (12) Bolt (17) Washer Washer (18) (16) (18) (16) Page 6 For technical questions, please call 1-888-866-5797. Item 63297...
  • Page 7 Wire Rope Clamp (24) 2. Insert a Wire Rope (23) through the Anchor and Corner Foot. 4. Repeat on the other corners. Note: Center Feet may be anchored to increase stability. Item 63297 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 6. Hook Ratchet Tie Downs into Corner Feet. Raise and lower the handles to tighten straps, alternating between left and right Feet, until straps are snug. Rail Rail Inside Straps 7. Repeat for Back Cover (21). Page 8 For technical questions, please call 1-888-866-5797. Item 63297...
  • Page 9 Cover with hook and eye straps. corner, until straps are snug. Pocket Pocket Bottom Strap Rails Ratchet Tie Down 9. Tighten all connections throughout the shed before use. Do not overtighten. Item 63297 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10: Maintenance

    Note: If product has no serial number, record Note: Some parts are listed and shown for month and year of purchase instead. illustration purposes only, and are not available individually as replacement parts. Page 10 For technical questions, please call 1-888-866-5797. Item 63297...
  • Page 11: Parts List

    Connector A Front Cover 3-Way Corner with Zipper Connector B 4-Way Center Back Cover Connector 3-Way Rail Ratchet Tie Down Connector 4-Way Center Wire Rope Connector Wire Rope Clamp Center Clamp Item 63297 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.