Sunitec BC370 Quick Start Manual

BC370 / BC370B
(BC370)
Speaker
1
Mute Button
2
Led indicator
3
Volume increase(+) Button
4
Volume decrease(-) Button
5
Multi-Function Button(MF-button)
6
Microphone
7
USB charging port
8
3. The red LED indicator ③ on the Car Kit will light up
and your Car Kit will start charging.When fully
charged, the red LED indicator ③ will turn OFF
Attention! Make sure that the Bluetooth
Car Kit is
fully charged before using the device.
Attention!
®
The Bluetooth
Car Kit will turn OFF automatically if
there has been no Bluetooth
connection between
®
the Bluetooth
Car Kit and another mobile device
for more than 30 minutes.
®
(BC370B)
8
8
®
®
FIRST USE PAIRING
You are required to pair the Bluetooth
Car Kit
with your mobile phone once before using it!
Make sure that the Bluetooth
Car Kit is
turned OFF.
→ Press and hold the MF-button ⑥ until the LED
indicator ③ starts flashing by blue and orange
colors alternately.
→ Let your phone search for Bluetooth
devices.
→ Select the BC370 Car kit / BC370B Car kit in
your mobile phone and enter the PIN code 0000
(*) to pair both devices. You will hear a beep.
→ The blue LED indicator ③ will light.
(*) Not required if your phone has Bluetooth
version 2.1 or higher
Attention!
• Make sure that the Bluetooth
function of your
mobile phone is ON and that it is in close proximity
to the Bluetooth

Car Kit.
• To ensure automatic reconnection between the
phone and the Bluetooth
Car Kit, we recommend
setting the Bluetooth
Car Kit as "Authorized" in
the Bluetooth
menu of your phone! Please refer
to the manual of your mobile phone for more
detailed information.
• If the Bluetooth
connection is not restored
automatically after disconnection, you can always
restore the connection manually in the menu of
your mobile phone.
3
6
3
6
3
®
®
®
®
®
®
4
5
5
3
®
®
®
®
6
6
6
6
6
2
2
4