Advertisement
Battery Charging
The smart charging circuitry is housed in the Power Module and will recharge a fully discharged
battery in 4 hours or less. Charging time using USB power may vary depending on computer.
1. Plug the AC Adapter into the Power Module and then into the wall socket.
2. The Power Module indicator light will be red until the battery pack is fully charged; then it
changes to green.
3. Unplug the AC Adapter from the Power Module and wall socket, grasping the connectors rather
than the cables.
4. Leaving the Power Module and AC Adapter or USB Cable connected indefinitely will not harm the
battery.
The MiNewt Mini-USB™ will run for 2 hours on high.
Run time is an approximation and will vary.
Lumen values represent an average of 10 randomly selected headlamps as
measured in a 0.6 meter Integrating Sphere.
NiteRider Technical Lighting Systems
8295 Aero Place, Suite 200
San Diego, CA 92123 USA
www.niterider.com
Run Time
Lumens: 300
Advertisement
