Bios Settings; General Remarks - Beckhoff CB3263 Series Manual

Chapter: BIOS Settings

5 BIOS Settings

5.1 General Remarks

In each setup page, standard values for all setup entries can be loaded. Previously saved settings are
loaded by pressing F2 and factory defaults are loaded with F3. Both F2 and F3, and also F4 ("Save &
Exit") always affect the whole set of setup entries.
Setup entries starting with a „►" sign represent submenus. Navigation between entries is done using the
arrow keys on the keyboard, with the <Enter> key being used to select an entry, which either opens up a
dialog box or opens a whole new submenu of setup entries.
Each setup entry has a short help text associated with it. This is displayed in the upper right hand corner
of the screen.
Notice
page 38
BIOS features and setup options are subject to change without notice. The
settings displayed in the screenshots on the following pages are meant to be
examples only. They do not represent the recommended settings or the default
settings. Determination of the appropriate settings is dependent upon the
particular application scenario in which the board is used.
Beckhoff New Automation Technology CB3263-xxxx
General Remarks