Hoover HV-RCF287 Quick Start Manual

Hoover's quick
& snappy start
up guide.
Let's get your chest freezer
up and running!
Welcome to your new Hoover freezer! We hope that this product brings you many years of enjoyment.
Comprehensive installation instructions, diagrams and safety advice are provided in the supplied
instruction manual.
CAUTION! The freezer is heavy - transport it with care! To avoid back or other injury, we recommend you
ask someone for help or use a mechanical aid when moving it.

Installation

• Before you start installing the freezer, wipe the interior surfaces
and accessories with a damp cloth to remove any dust from transit
and storage. Dry thoroughly.
• Tilt the freezer carefully – not more than 45 degrees – and move it
to its designated place. Use the roll wheels under the back corners
to help you position it in place and the levelling feet at the front for
adjustment, if necessary.
• Avoid areas where the freezer would be exposed to direct sunlight,
heat, extreme cold ambient temperatures or excessive moisture
and high humidity. Installing it in the coolest area of the room will
save energy consumption and running costs. Allow at least 10 cm
clear space at the back and sides of the unit, and 70 cm above
(Fig. 1), so air can circulate freely around the freezer.

Connection

Settling
• Before plugging in your new freezer, let it stand upright for at least 4 hours to allow the refrigerant gases
to settle into the compressor.
Connection
• Plug in the freezer and secure the power cord behind the unit, making sure the plug is accessible after
installation.

First use

• The first time you turn the unit on, select the appropriate mode (see overleaf) and set the temperature
control to the coldest temperature in the range. Then, after 4 hours, adjust the temperature to your
needs.
287 L Digital
Chest Freezer
287 L Digital Chest Freezer
Model #: HV-RCF287
V1.0
Version #:
1300 886 649
After Sales Support
1
≥70 cm
≥10 cm
≥10 cm
HV-RCF287