Advertisement
Follow the figure below to connect an HDMI signal source to the HDMI jack on the rear panel
of the unit.
After connection, turn on the power of the unit and the external AV signal source and use the
SOURCE and the direction buttons to select HDMI mode, and then press the ENTER button
to confirm.
HDMI provides both audio and video signals and typically provides superior image
quality to component or composite.
Connect the TV T2/S2 cable (the antenna cable, for example) to the antenna input jack on
the back of the unit so that you can receive television programmers.
After connection, turn on the power of unit. Then press the SOURCE button to select ATV or
DTV mode and conduct program selection.
T2/S2
11
Advertisement
