SV Sound Prime Wireless Pro SoundBase Manual page 20

Setting up/Using Amazon Alexa Voice Control
Prime Wireless Pro SoundBase does not have a built-in microphone. You'll need an Amazon Alexa enabled product like a
Dot, Echo or other to communicate voice commands to your system and to "Discover Devices" so that your Prime
Wireless Pro SoundBase can be identified.
Voice control of music from any Amazon Alexa Device on your WiFi network is as simple as, "Alexa, play reggae in the
living room," and you can adjust volume, skip track forward, mute, pause and stop the music. Set-up requires just a few
simple steps.
Directions for Setting Up Amazon Alexa
1. Open the Play-Fi app, go to "Settings". Select "Amazon Alexa" (image 22a). Follow prompts to sign
in and verify your Amazon account (images 22c - 22e).
2. You will see a list of products that can be voice controlled and if you will need to sign into your
Amazon account to enable Alexa voice control
3. Select the device you want to set up for Alexa Voice Control. In the example below "Bedroom"
was selected.
4. Next you will be prompted to sign in to your Amazon account
5. After your device is registered, you will be prompted to launch the Amazon Alexa App (or
download it if it's not already installed) to finish the Alexa setup (image 22f).
6. Within the Amazon Alexa app, choose the specific Amazon Alexa device you will be connecting,
and follow the prompts (images 22g, 22h and 22i).
7. Click "Enable" to finish linking the Play-Fi skill (images 22j-22l).
8. You are now ready to use your voice to play music on your Prime Wireless Pro SoundBase
(images 22m-22o).