UCHEER T1 Manual page 14

Introduction to CH-CUT
The core of the CH-CUT low-temperature catalytic decomposition technology is a
new kind of nanomaterials (catalyst) that decomposes the formaldehyde, benzenes,
ozone and other indoors common toxic and harmful gases. CH-CUT catalyst adopts
overmolding technology, the outmost layer is coated with activated carbon and it will
become spherical particles afterwards. The main components of CH-CUT catalyzer
are transitional metal oxides. This material possesses good catalytic degradation fu-
nction on formaldehyde, ozone, benzene, toluene and other toxic and harmful gases
in the air; it can conduct harmless degradation to formaldehyde, benzene, toluene
and xylene etc.
Technical principle
CH-CUT
page 24
Application Method
1. Preparations for starting up
2
1
Plug the plug of power adapter Touch any metal part of the
into round jack at rear of the machinebody,then the Ind-
machine, the machine sounds icator light lights while the
machine works out with a
"beep".
sound"beep". Then touch it
again, the machine sounds
"beep-beep". It indicates
that the machine works in
highspeed mode.
1
2. Shut down
① Unplug the power plug.
② Please reput the product into the
packing box when it is unused for
a long period.
3
Touch any metal part of the
machine body once again
while the indicator light turns
off, the machine sound "beep"
and stops.
2
page 25