Lexar Image Rescue 2.0 User Manual page 11

CARD UPDATE
The Card Update feature is only available for some Lexar USB-enabled
CompactFlash cards when used with a JumpShot cable or a certain readers.
Contact Lexar tech support to find out if your card can be updated.
Card Update will check for an update to a card's firmware by making a request to
Lexar Media's update server via the web. The request will be made using the
HTTP protocol so that any firewalls will not block the update. If an update is
available, a message will be displayed and the user can request it to be applied
to the card. The firmware will then be downloaded from the server and the card's
firmware updated. If there is no update, a "Firmware is up-to-date" message will
be displayed.
10