Cleaning And Care; Technical Details - Petromax kx25-padg-l User Manual

Tips for application on the Cool Box
DE
For application of the Adhesive Pad only a few steps are required. Observe the following to attach the
EN
Adhesive Pad safely and firmly to the lid of the Petromax Cool Box:
1. Clean the lid of your Cool Box lid carefully with water and a cleaning agent compatible with synthetic
FR
material / customary detergent before attaching the Adhesive Pad. Afterwards the lid needs to be
free of dust, grease or moisture.
ES
2. Remove the adhesive film on the back and hold the Adhesive Pad just above the lid of the Cool Box
for aligning.
3. Start on one side of the lid and place the edge of the Adhesive Pad flush and without pressure. Let
the rest of the pad follow slowly. As soon as the edges close exactly press down the Adhesive Pad
firmlywith the palms of your hands.
Attention: Do not completely attach the Adhesive Pad right after removing the adhesive
film! By means of light application the position might be correctable. After application, the
Adhesive Pad is not reusable.

Cleaning and care

In case the Adhesive Pad is severely soiled after your outdoor adventures you can clean it with only
little effort. Coarse dirt can be vacuumed, brushed off after drying, or simply wiped off with clear water
and a cotton cloth. Never use any strong detergents or a high-pressure-cleaner to clean your Adhesive
Pad. Cleaning away coarse dirt should always take place in a timely manner.

Technical Details

Model
Material
Properties
Dimensions (H x W x D) 0.5 x 55 x 37.5 cm
Weight
6
kx25-padg-l/-d
kx25-padw-l/-d
synthetic foam (EVA)
UV-resistant, temperature resistant,
waterproof, non-slip
164 g
kx50-padg-l/-d
kx50-padw-l/-d
synthetic foam (EVA)
UV-resistant, temperature resistant,
waterproof, non-slip
0.5 x 65.5 x 45.5 cm
238 g