Combining The Multi-Unit Chargers - Motorola PMPN4531 User Manual

MN007338A01-AE
Chapter 2 : Charger Operations
Charger Indication
Blinking amber
2.3

Combining the Multi-Unit Chargers

Prerequisites: The maximum unit of multi-unit charger that can be combined is four.
Procedure:
1 Place the chargers on the table for support before combining them.
2 To extend the connector, press and push the male connector latch to the left.
3 To combine the chargers, connect the male connector to the female connector.
The magnets of the chargers stick together magnetically.
4 Hold the sides of the combined chargers when moving to another location.
12
Description
Battery is in standby mode waiting to be charged.
NOTE: Battery might be too hot, too cold or
low voltage.