XCMG SQ10SK3Q Operation And Maintenance Manual page 3

B Performance data and specification: This section contains all the technical
characteristics of the crane in its standard set-up.
C Safety rules and devices： This section sets forth all the rules, introductions and
information regarding both operator and machine safety.
D Operator: This section specifies the skills requirement and other attributes that the
operator must possess.
E Description of controls and Instruments： This section explains and illustrates the
various controls and instruments located on the machine.
F Operate instruments ：This sections describes and illustrates the various machine
movements.
G analysis & eliminate for general faults： This section contains the faults of eliminate.
H Maintenance：This section contains charts and tables covering crane maintenance jobs
and schedules.
Customer information:
The manufacturer in the manual is XCMG Xuzhou Truck-mounted Crane Ltd
The operate instruments are designed by manufacturer.
You should notice the following points when check the machine.
NOTICE：
1. The requirement of the manual description.
2. The specification, rated capacity and other information contained in the manual refer to
the max capacity of the crane ,The capacity of crane will be reduced if the truck, ship, flat
vehicle to be matched crane have not enough stability, the capacity of the crane will be
reduced ,it should be defined again.
3. do not perform weld and tamper with electrical or hydraulic equipment and replace parts
with anything but original spares and to remove protection guards and devices.
maintenance should be done as request and at the specified intervals.
4.
徐州徐工随车起重机有限公司
- 3 -