60°
not allowed
work area
60°
The crane must be stabilized on firm ground. When working on soft or yielding ground you
must increase the load-bearing area by placing a stabilizer support plate between the base of the
stabilizer leg and the ground in order to distribute the load sufficiently. Do not operate the crane
close to ditches or on soft, yielding ground.
•You must know, at least approximately, the weight of the load you intend to lift, and the load not
exceed the indicated value in figure.
•Use the controls on the same side as the load so as to ensure maximum visibility.
徐州徐工随车起重机有限公司
180°
bad stability work area
bad stability work area
bad stability work area
- 14 -
360° allowed
work area