Initial Setup - Panasonic TH-32L400K Operating Instructions Manual

Initial Setup

When you first turn on the TV, a series of steps will pop-
up to guide you to setup your TV.
These steps are not necessary if the setup has been
completed by your local dealer.
1
Plug the mains plug into the socket
outlet and turn on the TV.
It may take a few seconds before the screen is
displayed.
2
Select your language.
OSD Language
English
Store
Select
OK
3
Select [Home].
Please select your viewing environment:
Home
Confirm
Select
OK
[Shop] is for shop display.
Setup is now complete and your TV is ready for
viewing.
4
Select your country.
Country
Other
MALAYSIA
Confirm
Select
OK
8
AC 100 - 240 V,
50/60 Hz
Chinese
Shop
5
Select channel type.
ANT in
ATV DTV
Start auto Tuning
6
Scanning starts.
Channel Tuning
ATV : 3 Programme
DTV : 0 Programme
Radio : 0 Programme
Data : 0 Programme
5% 215.75MHz
Exit
OK
This function searches and stores TV channels.
The stored channels and sorted channel order vary
depending on the area, broadcasting system and
conditions of signal reception.
Note
If tuning has failed, check the connection of the
RF cable, then follow the on-screen instructions.
ATV/DTV
Select
OK
(ATV)