Installing The Stand Or Wall Mount Bracket - Hisense 98U7HAU Quick Start Manual

Installing the Stand or Wall Mount Bracket

CAUTION
Be sure to disconnect the AC power cord before removing a base stand or installing
wall mount brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
Installing the stand
Follow the illustrations and textual instructions below to complete the installation steps:
NOTE
3 people or above are required for installing the stand.
1. Take out the base stands.
2. First, take out the upper cushion
a1, then take out upper cushion
a2. Next, take out the front
cushion and back cushion.
3. Two people stand on each side of the
television, grasp big handles with one
hand and hold its top with another hand.
The other person could give assistance
during the installation. Place the TV on
the upper cushions with the screen face
upward. Make back cover touch the
upper cushions.
Note: Two upper cushions should be at
the middle of the TV.
upper
cushion a1
upper
cushions
1
upper
cushion a2
front cushion
back cushion
upper
cushions
700mm