freightliner PX113064S T 2016 Manual page 39

1
2
3
07/30/2019
1. Recirculation Status
2. Fan Speed
3. Air Conditioning Status
4. Temperature Settings
5. Blower Selection
6. Sleeper Override
Activating Bluetooth®
NOTE: An iPhone may be connected to the
infotainment system via Apple CarPlay.
1. Open Settings by selecting the gear shortcut icon
in the lefthand corner of the screen.
2.
Select Connectivity.
3. Make sure Bluetooth is turned on.
4. Make sure Bluetooth is active on the phone and
the phone is visible via Bluetooth.
Connecting a Phone Using Bluetooth®
Older phones may require that an authorization
code be manually entered on the mobile phone
and into the infotainment system.
1. Open the Device Manager.
2. Select Connect Device.
3.
Select Connect New Device. The vehicle
searches for the device.
4. If the connection fails, the message My Device
Was Not Found will appear. Verify the Activating
Bluetooth requirements have been met.
4
Fig. 3.12, Informational Climate Bar
5. Select the My Device Was Not Found message
or press the reload icon at the top right to have
the vehicle rescan for devices.
6. When a device is found, the name of that device
will appear on the screen in addition to the
message My Device Was Not Found. Select the
device name.
7. A pop-up will appear asking for verification of a
passkey on the phone. Verify the passkey. The
device is authorized and connected.
NOTE: The phone will automatically reconnect
to the system when in range until deauthorized
either in the ICC5 infotainment system or on the
phone itself.
The Phone Menu
Once a phone is authorized and connected, a mobile
phone menu for that phone is available.
In addition, the call list and contacts of the primary
phone are loaded and accessible.
The phone menu provides a search function for the
primary phone's contacts, a number pad for calling
people not in the contact list, and access to
Bluetooth and phone specific settings.
Instruments
5
6
f611769
3.20