Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DLS PERFORMANCE PS10
Summary of Contents for DLS PERFORMANCE PS10
- Page 1 User manual 10” slim subwoofer...
-
Page 2: Table Of Contents
Serial connection Running-in time DLS support Welcome to DLS! Enclosure info Thank you for buying a DLS Performance PS10 Sealed enclosures subwoofer. For us, it’s all about the sound experien- Vented enclosures ce. We care deeply about sound and construction Damping quality. -
Page 3: Installation
Installation Wiring diagram Warning! Do not expose your amplifier to Your PS10 subwoofer has a single 4 ohm voice coil. How to connect the subwoofer loads below the manufacturer’s recommen- depends on what type of amplifier you use dations. Below you will find some examples and it´s optimum load. - Page 4 Parallel connection Parallel connection Two 4 Ohm subwoofer = 2 Ohm load Three 4 Ohm subwoofer = 1.33 Ohm load 2 Ohm 1.33 Ohm 4 Ohm 4 Ohm 4 Ohm 4 Ohm 4 Ohm...
-
Page 5: Serial Connection
Serial connection Serial connection Two 4 Ohm subwoofer = 8 Ohm load Three 4 Ohm subwoofer = 12 Ohm load 8 Ohm 12 Ohm 4 Ohm 4 Ohm 4 Ohm 4 Ohm 4 Ohm 4 Ohm... -
Page 6: Running-In Time
• Keep the subwoofer in the plastic bag Information can also be found on our until it is time for installation. WEB-site www.dls.se We follow a policy of continuous advancement in development. • Carefully clean the enclosure inside with For this reason, all or part of specifications a vacuum cleaner before mounting the &... -
Page 7: Sealed Enclosures
40Hz), and at the expense of some control Sealed enclosures and power handling at the lowest frequen- cies ( below the ports tuning frequency). If Sealed enclosures constructions is straight you are using a small amplifier a vented forward and are easy to build. The size is box will provide more perceived bass not critical, but it can’t be too small. -
Page 8: Enclosure Placement
Note! The performance of the recommen- compartment is separated from the trunk, ded enclosures will vary from vehicle to one option is to install enclosure with the vehicle. It is more difficult to get a tight and subwoofer directed towards the rear seat. well defined bass in a SEDAN vehicle Some cars have an opening in the middle because of the separated space between... -
Page 9: Specifications
Specifications Art. no CS-PS10 Electro-Acoustic Parameters Size: 10”/250mm 35Hz Impedance: 4 Ohm 3.2 Ohm RMS power: 400W Qms: 11.1 MAX power: 800W Qes: 0.52 PEAK power: 1200W Qts: 0.51 Sensitivity: 84dB 1W/1M Cms: 0.15mm/N Voice coil size: 51mm / 2” Mms: 132g Voice coil material:... -
Page 10: Product Markings
European Economic Area (EEA). DLS products complies with the relevant provisions of the RoHS Directive for the European Union. In common with all Electrical and Electronic Equipment (EEE) the product should not be disposed of as household waste. - Page 11 We follow a policy of continuous advancement in development. For this reason all or part of specifications & designs may be changed without prior notice. We reserve for possible typos, factual or numeric errors that may have been printed on any products, package designs, user manuals and/or other included accessories.
Need help?
Do you have a question about the PERFORMANCE PS10 and is the answer not in the manual?
Questions and answers