Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SUMMER WAVES 6.5 Si
Summary of Contents for SUMMER WAVES 6.5 Si
- Page 1 INVERTER SWIMMING POOL HEAT PUMP...
-
Page 3: Table Of Contents
Content Application ....................1 Features ....................1 III. Technical Parameter ................2 Dimension ....................3 Installation instruction ................4 Operation instruction ................8 VII. Testing ....................10 VIII. Precautions ................... 11 Maintenance ..................12 Trouble shooting for common faults ..........13 Appendix 1: Heating priority (Optional) ........... -
Page 4: Application
Thank your choosing our product and your trust in our company. To help you get maximum pleasure from using this product, please read this instruction manual carefully and operate strictly according to the user manual before starting the machine, otherwise the machine may be damaged or cause you unnecessary harm. -
Page 5: Technical Parameter
III. Technical Parameter Summerwave Summerwave Summerwave Summerwave Summerwave Summerwave Summerwave Model 6.5 Si 8.0 Si 9.0Si 12.5 Si 16.5 Si 20.5 Si 25.0 Si Advised pool volume(m 14~28 20~35 20~40 30~55 35-70 45-85 55-100 Operating air 0~43 temperature (℃) Performance Condition: Air 26°C, Water 26°C, Humidity 80% Heating capacity (kW) 12.5... -
Page 6: Dimension
IV. Dimension UNIT=MM Summerwave 6.5Si Summerwave 8.0Si Summerwave 9.0Si Summerwave 12.5Si Summerwave 16.5Si Summerwave 20.5Si 1092 Summerwave 25.0Si ※ Above data is subject to modification without notice. Note: The picture above is the specification diagram of the pool heater, for technician’s installation and layout reference only. -
Page 7: Installation Instruction
V. Installation instruction 1. Drawing for water pipes connection (Notice：The drawing is just for demonstration, and layout of the pipes is only for reference) 2. Connecting your power wire For power supply: 230V 50Hz Distribution Box Swimming Pool Heat Pump Wiring Board (Customer prepare) Power Cord Power Supply... - Page 8 3. Electric Wiring Diagram Options for protecting devices and cable specification Summerwave Summerwave Summerwave Summerwave Summerwave Summerwave Summerwave MODEL 6.5 Si 8.0 Si 9.0Si 12.5 Si 16.5 Si 20.5 Si 25.0 Si Rated Current 11.5 15.0 18.0 23.0 25.0 Rated...
- Page 9 B. Installation instruction 1) Location and size The heat pump should be installed in a place with good ventilation * MINIMUM DISTANCE Filter Water processor Water switch 2) The frame must be fixed by bolts (M10) to concrete foundation or brackets. The concrete foundation must be solid.
- Page 10 C. Wiring 1) Connect to appropriate power supply, the voltage should comply with the rated voltage of the products. 2) Earth the machine well. 3) Wiring must be handled by a professional technician according to the circuit diagram. 4) Set leakage protector according to the local code for wiring (leakage operating current ≤...
-
Page 11: Operation Instruction
VI. Operation instruction DESIGNATION SYMBOL OPERATION Power ON/OFF Press to power on or off the heat pump Up/ Down Press to set desired water temperature Press to select cooling, heating and auto (some models Heat/Cool/Auto will heat only) Press to select Smart/Silence mode Smart mode:100%-20% capacity Silence mode:80%-20% capacity Note:... - Page 12 2.2.1 Status on the display Auto Mode Defrost Mode Heating Mode Cooling Mode Timer ON/OFF 2.2.2. Time setting Press for 5 seconds to enter time setting. 88:88 is flashing on the display Press to adjust the time (fast adjusting by continuous pressing). Then, press to confirm and exit.
-
Page 13: Testing
the time to cancel the relevant Timer setting. Exit automatically if no operation for 30 seconds in the Timer ON/OFF mode, 2.2.4 Silence mode The Smart mode as default will be activated when the machine is tuned on and the display shows When machine is on, press “... -
Page 14: Precautions
Trial The user must “Start the water Pump before the Machine will start. The Machine will detect the water flow and start when it is ready. The user should start the pump, check for any leakage of water and then set suitable temperature. -
Page 15: Maintenance
Safety Please keep the main power supply switch far away from the children. When a power cut happens during running, and later the power is restored, the heater will start up automatically. So please switch off the power supply when there is a power cut, and reset temp when power is restored. -
Page 16: Trouble Shooting For Common Faults
B． Please clean this machine with household detergents or clean water, NEVER use gasoline, thinners or any similar fuel. C． Check bolts, cables and connections regularly. X. Trouble shooting for common faults FAILURE REASON SOLUTION No power Wait until the power recovers Power switch is off Switch on the power Heat pump doesn’t... - Page 17 Failure code DISPLAY NOT FAILURE DESCRIPTION No water protection Power supply excesses operation range Excessive temp difference between inlet and outlet water(Insufficient water flow protection) Ambient temperature too high or too low protection Anti-freezing reminder DISPLAY FAILURE DESCRIPTION High pressure protection Low pressure protection 3 phase sequence protection (three phase only) Water outlet temp too high or too low protection...
-
Page 18: Appendix 1: Heating Priority (Optional)
XI. Appendix 1: Heating priority (Optional) -
Page 19: Appendix 2: Heating Priority (Optional)
XII. Appendix 2: Heating priority (Optional) - Page 20 Parallel connection with filtration clock A: Water pump timer B: Water pump wiring of Heat Pump Note: The installer should connect A parallel with B (as above picture). To start the water pump, condition A or B is connected. To stop the water pump, both A and B should be disconnected.
- Page 24 Version:Cb9IN-1...
Need help?
Do you have a question about the 6.5 Si and is the answer not in the manual?
Questions and answers