Table of Contents
Advertisement
a) Clean the power tool with a damp cloth and a little soap. Use paintbrushes or brushes
for hard-to-reach areas.
b) In particular, clean the ventilation openings and the tool holder with a cloth and brush
after each use.
c) Remove particularly stubborn dust residues in inaccessible places with compressed
air (max. 3 bar).
Note: Do not use any chemical, alkaline, abrasive or other aggressive cleaning agents or
solvents; these can attack and damage the surfaces of the power tool.
Repair and Maintenance
There are no user-serviceable or repairable parts inside. Never try to repair the power
tool yourself. Always contact a qualified specialist.
If the mains connection cable of this power tool is damaged, it must be replaced with a
special connection cable available from the manufacturer or his customer service.
Storage and transport
a) Clean the power tool as described and let it dry completely.
b) Store the power tool in the original packaging if you do not intend to use it for a long
period of time.
c) Always store the power tool out of the reach of children in a well-ventilated and dry
place.
d) Always switch off the power tool before transporting it.
e) Always carry the power tool by the handles provided.
f) Protect the power tool against tilting, vibrations and shocks, especially when transport
ing it in vehicles.
Disposal
The meaning of the crossed-out garbage can: Do not dispose of electrical devices in
the household waste, use the collection points in your community. Ask your local
authority about the location of the collection points, If electrical devices are disposed
of in an uncontrolled manner, dangerous substances can get into the groundwater
and thus into the food chain during weathering, or flora and fauna can be poisoned for
years. If you replace the device with a new one, the seller is legally obliged to accept
the old one for disposal at least free of charge
8
Advertisement
Table of Contents
