Table of Contents
Advertisement
Intended use
• The device is intended for polishing painted surfaces e.g. cars, boats, doors etc. and
for sanding sheet metal, metals, plastics, wood or similar materials. Only use polishing
and grinding discs with a 180 mm Ø Velcro connection.
• The manufacturer assumes no liability for improper use or changes to the machine.
• The device is intended for private use only. The device is not suitable for commercial
use.
• Also observe the safety instructions, the installation and operating instructions as well
as the general accident prevention regulations.
Technical data
Model
Voltage / Frequency
Power
Spindle size
Rated speed
Rated capacity max.(Diameter of the grinding tool)
Sound pressure level, L
Sound power level, L
Vibration,a
Protection class
Note:
1. The vibration value refers to surface grinding. Other applications can cause different
levels of vibration.
2. The sound and vibration values were measured in accordance with EN 60745-1 and
EN 60745-2-3.
3. The specified vibration value has been determined according to a standardized test
method and can be used to compare different power tools with one another. This value
is also suitable for assessing loads for the user caused by vibrations in advance.
Warning! Depending on how you use the power tool, the actual vibration values may
differ from those specified.
Take measures to protect yourself against vibration exposure. Take into account the
entire work process, including times when the power tool is working without load or when
it is switched off.
Suitable measures include regular maintenance and care of the power tool and tool
attachments, keeping your hands warm, regular breaks and good planning of work
processes.
pA
WA
h
MMT A170 704
230 - 240 V~ (AC) / 50 Hz
1200 W
14mm
600-3400min
Ø180mm
87.63dB(A),k=3dB
98.63dB(A),k=3dB
13.078m/s², k=1,5 m/s²
II
4
-1
Advertisement
Table of Contents
