Table of Contents
Advertisement
Quick Links
PACK CONTENTS
1 x pre-assembled wall unit
1 x dispenser with key to open lid
1 x 500ml sanitiser
4 x AA batteries
4 x stand-off fixings with screws and raw plugs
Wall Units
ASSEMBLY INSTRUCTIONS:
1. Fix the unit to the wall using the stand-off
fixings:
a. Unscrew caps
b. Use screws & raw plugs provided to fix
c. Place unit on barrel fixings, attach caps
2. Insert 4 x AA batteries into battery
compartment on bottom of dispenser.
3. Take dispenser, remove lid using white key,
remove lid, fill with sanitiser GEL and attach
to bracket on the stand.
4. Please follow detailed instructions for the
dispenser overleaf.
barrels to the wall
and tighten clockwise
To order more SanStand products or if you have
any questions, please contact us today:
www.sanstand.co.uk
info@sanstand.co.uk
0845 519 5442
Advertisement
Table of Contents
Related Manuals for SANSTAND SANWALL
Summary of Contents for SANSTAND SANWALL
- Page 1 Wall Units PACK CONTENTS ASSEMBLY INSTRUCTIONS: To order more SanStand products or if you have 1 x pre-assembled wall unit 1. Fix the unit to the wall using the stand-off any questions, please contact us today: fixings: 1 x dispenser with key to open lid a.
- Page 2 Automatic Soap Dispenser: User manual INSTRUCTIONS SETUP Figure 1 Figure 2 Figure 3 Cover Container LED lamp FEATURES 5. Power On/Off button First press will turn on giving a standard The sensor is at the base of the dispenser with effect dispense and LED light flashes once.
Need help?
Do you have a question about the SANWALL and is the answer not in the manual?
Questions and answers