Page 1
___________________________ User Guide DMXSM-H18 Splitter DMXSM-H81 Merger Document Release Aug. 2006 Revision A...
Page 2
Leviton will not be responsible for any loss of use time or subsequent damages should any of the equipment fail during the warranty period, but agrees only to repair or replace defective equipment returned to its plant in Tualatin, Oregon.
Leviton DMXSM-H18/H81 The DMXSM-H18 model allows you to conveniently split one incoming DMX signal into eight separate, opto-isolated, outbound DMX signals. The DMXSM-H81 model allows for eight separate, opto-isolated, DMX IN signals to be merged into one outbound DMX signal.
There are no user serviceable parts inside. Do not attempt any repairs yourself, as doing so will void the warranty. Please contact Leviton Technical Support if the unit is not functioning properly. If the unit has been stored in a cold environment (below 40ºF), do not turn the power on until it warms up or else damage may occur.
You may also call us during regular business hours at 1-800-959-6004. Please have the model number and serial number available when you call. Contact Information Leviton Lighting Management Systems Division 20497 SW Teton, Tualatin, OR 97062 Mailing Address:...