ATD AIR ATD-2139 Quick Start Manual

WARNING
• MAXIMUM RPM OF 22,000
WARNING
• ALWAYS WEAR APPROVED EAR
And eYe proTecTion.
• ALWAYS OPERATE AT MAX. AIR
PRESSURE OF 90 PSIG, 6.2 BAR.
• REPETITIVE MOTION/EXTENDED
EXPOSURE TO VIBRATION MAY
HARM HANDS/ARMS.
• ACCESSORY USED MUST BE RATED
HIGHER THAN 22,000 RPM
• USE RECOMMENDED GUARD
S P E C I F I C A T I O N S
Free Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22,000 RPM
Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4"-18 NPT
Hose Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8" I.D.
Rec. Air Pressure . . . . . . . . . . . . . . . . . . . . . . . . 90 psig (6.2 bar)
Avg. Air Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . 3.92 cfm
Sound Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 dBA
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5"
Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.8 Lbs.
ATD-2139
ATD-2139
WARNING
AlwAYS reAd
WARNING
inSTrucTionS
before uSing
power ToolS
This insTrucTion Manual
conTains iMporTanT
safeTy inforMaTion
read carefully and
undersTand all
BEFORE
in for Ma Tion
operaTing This Tool!
save This Man u al
for fuTure ref er ence.
- 1 -
UTILITY CUT-OFF TOOL
WITH GUARD
WARNING
Some dust created by power
WARNING
sanding, sawing, grinding, drilling,
and other construction activities
contains chemicals known to cause
cancer, birth defects or other
reproductive harm. Some examples
of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks
and cement and other
masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures
varies, depending on how often you
do this type of work. To reduce your
exposure to these chemicals: work
in a well ventilated area, and work
with approved safety equipment,
such as those dust masks that are
specially designed to filter out
microscopic particles.
Rev. 3/19/09