Table of Contents
Advertisement
After you have activated the timer, all
the displays will turn off after a few
minutes to save energy.
Press the button to switch the
display back on again for a few
minutes.
Open the door if you need to check
how long the timer has left to run.
The time up until the program starts will
count down in the display in hours for
durations above 10 hours, and in
minutes for durations below 10 hours.
At the end of the delay period, the
program selected begins automatically.
The time left will appear in the display
and the Timer indicator light will go
out.
Starting a program before the time
for the timer has elapsed:
A program can be started before the
time for the timer has elapsed.
Proceed as follows:
Open the door.
Turn the dishwasher off with the
button.
Turn the dishwasher on again with
the button.
Select the program you want.
Start the program by closing the
door.
The in-operation indicator light comes
on to show that a program has been
started.
Options
55
Advertisement
Table of Contents
