Table of Contents
Advertisement
Warnings and safety instructions
Do not sit the dishwasher on the hose. The hose needs to be free
of kinks and able to move freely after installation. Do not place the
hose or power cord next to a heat source e.g., hot water pipes. Do
not expose the hose or power cord to corrosive substances (e.g.,
chloride). Damage to the hose or power cord could cause electrical
shock or water damage.
This dishwasher is supplied with a special lamp (depending on the
model) to cope with particular conditions (e.g., in terms of
temperature, moisture, chemical resistance, abrasion resistance, and
vibration). This lamp must only be used for the purpose for which it
is intended. The lamp is not suitable for room lighting. Replacement
lamps may only be installed by a Miele authorized technician or by
Miele Service.
Correct installation
The dishwasher must be installed and connected in compliance
with the supplied installation sheet.
Be careful before and while installing the dishwasher.
Some metal parts pose a risk of injury / being cut. Wear
protective gloves.
The dishwasher must be correctly aligned horizontally to ensure
problem-free operation.
In order to ensure stability, built-under and integrated dishwashers
must only be installed under a continuous countertop which is
secured to adjacent cabinetry.
The dishwasher must only be built into a tall unit if additional
safety precautions are taken. In order to safely install the appliance
in a tall unit, please use the tall unit installation kit and observe the
installation sheet provided. Otherwise there is the danger of the unit
tipping over.
12
Advertisement
Table of Contents
