Care And Cleaning - AEG TR9W75680 User Manual

26 www.aeg.com
To exit this mode, either press any
button, turn the selector knob or switch
the appliance off.
10.5 Factory Defaults
This function allows to restore the factory
default settings. The saved options and
working modes will be reset. It will also
remove WiFi network credentials from
the appliance memory and reset
personalized program settings.
To activate this option follow steps
below:
1. Switch the appliance on by pressing
Ein/Aus button.

11. CARE AND CLEANING

11.1 Cleaning the filter
At the end of each cycle the
symbol comes on the display and you
must clean the filter.
The filter collects the lint
during the drying cycle.
To achieve the best drying
performances clean the filter
regularly , clogged filter lead
to longer cycles and energy
consumption increase.
Use your hand to clean the
filter , and if necessary , a
vacuum cleaner .
CAUTION!
Avoid the use of water to
clean the filter. Instead throw
away lint in the dustbin
( avoid dispersion of plastic
fiber in water ambient).
2. Wait approximately 8 seconds.
3. Press and hold the Leise and
Knitterschutz buttons for some
seconds.
4. The appliance will acknowledge the
operation by displaying
1. Open the door. Pull the filter up.
Filter
2. Push the hook to open the filter.
3. Gather lint with hand from both
internal parts of the filter.
If the procedure does not
work (this could be due to
timeout or wrong keys
combination), switch the
appliance off and repeat the
sequence from the
beginning.
.