Getting Started - VTech CoComelon Go!Go! SmartWheels JJ's House Track Set Manual

GETTING STARTED

Battery Removal and Installation
JJ's Family Car
1. Make sure the unit is turned Off
2. Find the battery cover located on the
back of the unit, use a screwdriver to
loosen the screw and then open the
battery cover.
3. Remove old batteries by pulling up on
one end of each battery.
4. Install 2 new AAA (AM-4/LR03)
batteries following the diagram inside
the battery box. (For best performance, alkaline batteries or fully
charged Ni-MH rechargeable batteries are recommended).
5. Replace the battery cover and tighten the screw to secure.
.
6
6
6