Section 6. Install Heater - Trane BAYEVAC04BK1B Installer's Manual

Section 6. Install Heater

STEP 1 - Remove Heater Compartment Panel.
STEP 2 - Disconnect & Dispose of Pigtail Harness.
1. Cut the wire tie that is holding the pigtail harness.
2. Unplug and dispose of pigtail harness.
Important: If using a BAYSUPFLGA, B, or C Supply
Duct Flange Kit, install the kit before inserting the
heater.
STEP 3 - Insert heater assembly into heater compart-
ment.
1. Move factory wiring out of the way and into the grooves
provided in cabinet.
2. Slide heater into heater compartment of air handler.
INSTALLER'S GUIDE
Pigtail
Harness
Heater
Compartment
Panel
Breaker
Cover
Wire Tie
Page 7