INTRODUCTION Thank you for purchasing our absorption refrigerator. This unit is designed to improve your living and entertaining comfort. The absorption system refrigerator is a compact, totally silent refrigerator that uses no compressors or fans. Originally developed for commercial use or similar use. With its silent operation and attractive design, you will enjoy the convenience and comfort for years to come.
IMPORTANT SAFETY PRECAUTIONS Before you use your absorption refrigerator, please read this instruction manual carefully. Use this appliance only for its commercial purpose as described in this owner s manual. This absorption refrigerator must be properly installed in accordance with the installation instructions before it is used. Never unplug you absorption refrigerator by pulling on the power cord.
INSTALLATION It is advisable to clean the inside of the absorption refrigerator with lukewarm water using a mild detergent, and then to dry it thoroughly prior to use. The temperature in the appliance will depend on: The temperature in the room The frequency and duration of periods when the door is open.
PRODUCT PARTS AND FEATURES Lamp Balcony Feet Shelf Installation and use of the accessories as shown in above figure is the most efficient in terms of energy saving. HOW TO OPERATE ABSORPTION REFRIGERATOR 1. Insert power plug into wall outlet 2.
ABSORPTION REFRIGERATOR CARE AND CLEANING Warning:To avoid electric shock always unplug you absorption refrigerator before cleaning. Ignoring this warning may result in injury. General:Do not use harsh chemicals, abrasives, ammonia, chlorine bleach, concentrated detergents, solvents or metal scouring pads. Some of these chemicals may dissolve, damage and/or discolor your absorption refrigerator.
REVERSING THE DOOR (OPTION) How to reverse the door Remove the lower hinge by loosening and removing the screws with screwdriver. Carefully lower the door and remove it. Remove the two screws from the left top hinge position, take the metal part off the hinge position. Remove the two screws from the right top hinge and take off the hinge, insert the metal part, rivet the two screws thereafter.
Slider installation instruction (optional part not included in the package) Part A, mounted to minibar door Part B, mounted to furniture door Step 1: Fix Part B onto furniture door with screws. Make sure the thicker end is be in the outside. Part B, mounted to furniture door Step2:...
Page 11
Herewith, we state that this product, complies with the requirements of below directives: EMC-Directive: 14/30/EU Low Voltage Directive: 14/35/EC CE Marking Directive: 96/68/EEC ErP Directive: 09/125/EC ROHS Directive: 11/65/95/EC & delegated Directive (EU) 15/863 The detailed declaration of conformity can be found at www.morris.gr...
Need help?
Do you have a question about the GRB-410 and is the answer not in the manual?
Questions and answers