GMC HUMMER EV 2022 Manual page 7

6 Keys, Doors, and Windows
If it becomes difficult to turn a key, inspect
the key blade for debris. Periodically clean
with a brush or pick.
With an active OnStar or connected service
plan, an OnStar Advisor may remotely
unlock the vehicle. See the owner's manual.
If locked out of the vehicle, see Roadside
Assistance Program 0 130.
If equipped with memory seats, remote keys
1 and 2 are linked to seating positions of
memory 1 or 2. See Memory Seats 0 14.
Door Locks
{
Warning
Unlocked doors can be dangerous.
Passengers, especially children, can
.
easily open the doors and fall out of a
moving vehicle. The doors can be
unlocked and opened while the vehicle
is moving. The chance of being thrown
out of the vehicle in a crash is
increased if the doors are not locked.
So, all passengers should wear seat
belts properly and the doors should be
locked whenever the vehicle is driven.
Warning (Continued)
Young children who get into unlocked
.
vehicles may be unable to get out.
A child can be overcome by extreme
heat and can suffer permanent injuries
or even death from heat stroke.
Always lock the vehicle whenever
leaving it.
Outsiders can easily enter through an
.
unlocked door when you slow down
or stop the vehicle. Locking the doors
can help prevent this from happening.
To lock or unlock the doors from outside the
vehicle:
Q
Press or
.
owner's manual.
Use the mechanical key in the
.
driver door.
To lock or unlock the doors from inside the
vehicle:
Q
Press or
.
switch.
Pulling an interior door handle will unlock
.
the door. Pulling the door handle again
unlatches it.
(Continued)
K
on the remote key. See the
K
on the power door lock
Keyless Access
The remote key must be within 1 m (3 ft) of
the eTrunk™ or door being opened or
locked. Press the button on the door handle
to open. See "Keyless Access Operation" in
the owner's manual.
Free-Turning Locks
The door key lock cylinder turns freely when
either the wrong key is used, or the correct
key is not fully inserted. The free-turning
door lock feature prevents the lock from
being forced open. To reset the lock, turn it
to the vertical position with the correct key
fully inserted. Remove the key and insert it