Table of Contents
Advertisement
Quick Links
INSTRUCTION GUIDE FOR DTT-12-02
Sym
NC
New Release per E.O. P21080
A
Revised per E.O. P21276
BEFORE using this hand tool, please read these instructions completely!
Basic Safety Instructions
This crimp tool must be used in full compliance with all applicable safety rules, regulations and
practices. It must be properly maintained, undamaged and in good working order. Unauthorized
modification is prohibited and shall void all warranties. Always wear safety glasses with side
shields and other appropriate personal protective equipment.
CAUTION:
Applications
Hand tool DTT-12-02 has been developed for field crimping of Deutsch stamped and formed
contact numbers 1060-12-01** Pin and 1062-12-01** Socket per Table 1:
** Note: Plating of the contacts is characterized in the final 2 digits of the part number.
** Examples: 44 = Gold Plate, 66 = Tin/Nickel
Description
DTT-12-02 has a locator with a combination contact lock pawl with integral wire stop, fixed and
movable crimp dies, emergency ratchet release, and crimp force adjustment wheel.
The ratchet has six steps and opens automatically after the crimp is completed. To prevent
damage to the tool, operator, or contact, an emergency release is included.
Revision Letter:
Title
Description
Misuse May Cause Personal Injury. Keep Out Of Reach Of Children!
Never Insert Fingers Between Any Moving Parts Of The Tool!
A
Engineering Order Number:
I N F O R M A T I O N
INDUSTRIAL
3850 Industrial Avenue
Revisions
P21276
•
Hemet, CA 92545
Drawing Number
0425-078-0000
Date
Approved
10/12/11
S. Beard
2/3/12
R.D.R.
Page
1
of
4
Advertisement
Table of Contents
Related Manuals for Deutsch DTT-12-02
Summary of Contents for Deutsch DTT-12-02
- Page 1 ** Examples: 44 = Gold Plate, 66 = Tin/Nickel Description DTT-12-02 has a locator with a combination contact lock pawl with integral wire stop, fixed and movable crimp dies, emergency ratchet release, and crimp force adjustment wheel. The ratchet has six steps and opens automatically after the crimp is completed. To prevent damage to the tool, operator, or contact, an emergency release is included.
- Page 2 Warranty These tools are subject to thorough quality control measures before leaving the factory. The general terms and conditions of warranty are available from Compagnie Deutsch GmbH. Maintenance and Inspection Maintenance and inspection should be performed after ≈ 5,000 crimps or every 6 months.
- Page 3 0425-078-0000 Recommended Cavity for wire Gauge and Insulation Types Use Table 1 to insure best crimp results with DEUTSCH stamped contact types: 1060-12-01** PIN or 1062-12-01** SOCKET (0425-208-0000 Information Drawing) Table 1: Cavity, Wire size and Insulation Types (note dimensions are in mm).
- Page 4 3850 Industrial Avenue Hemet, CA 92545 Title Drawing Number INSTRUCTION GUIDE FOR DTT-12-02 0425-078-0000 REFERENCE Sizes in mm for sample crimps made per Table 1: Table 1 Typical crimp dimensions (stopping at ratchet-release) Using conductor types per SAE J1123 and ISO 6722 (Metric) Conductor ...
Need help?
Do you have a question about the DTT-12-02 and is the answer not in the manual?
Questions and answers