Lenovo ThinkPad Z60m 2529 Hardware Maintenance Manual page 84

Removing and replacing a FRU
In step 2 , press the left and right sides of the palm rest
toward the center to release the side latches, as in this
figure. Then release the latches indicated by arrow 3 .
Pull the palm rest a little in the direction shown by arrow
4 , and then detach the touch pad connector by pulling
the tab with your fingers in the direction shown by arrow
5 .
When installing: Make sure that the touch pad connector
80
MT 2529, 2530, 2531, 2532
3
2
2
4
5
is attached firmly.