Table of Contents
Advertisement
Quick Links
LED Emergency Battery Backup
Installation Instructions
Ordering Code: EB40
WHAT COMES IN THE BOX
(1) EB40 unit
(1) Installation instructions
(1) Charging indicator test switch with 2 screws
(1) Test switch cover
(2) Waterproof nuts
(1) Remote control
(11) Wire nuts
TOOLS NEEDED
Wire stripper
Wire cutter
Phillips screwdriver
Step ladder
Advertisement
Table of Contents
Related Manuals for LITETRONICS EB40
Summary of Contents for LITETRONICS EB40
- Page 1 LED Emergency Battery Backup Installation Instructions Ordering Code: EB40 WHAT COMES IN THE BOX TOOLS NEEDED (1) EB40 unit Wire stripper (1) Installation instructions Wire cutter (1) Charging indicator test switch with 2 screws Phillips screwdriver (1) Test switch cover...
- Page 2 • Use with grounded, UL/ETL listed, dry or damp location rated fixtures. • CAUTION: The EB40 provides more than one power supply output source. To reduce the risk of electrical shock, disconnect both normal and emergency source by turning off the A.C. branch circuit.
- Page 3 • Range - With the antenna extended, the range will be up to 40’. AUTOMATIC SELF-TESTING • The EB40 includes a self-testing function, which will perform a 30-second discharge test once a month and a full discharge test one a year. At this time, the unit will simulate an AC power failure and automatically switch to emergency mode.
- Page 4 Choose a location for the Emergency Battery Backup unit. The indicator light/ test switch should be mounted where they can be easily seen by inspectors. 2. The input voltage to the dimmable wires (DIM+, DIM-) of the EB40 must be less than 20Vdc. Emergency LED Driver 3.
- Page 5 *When the led driver power more than the emergency power *When the led driver power more than the emergency power B)With Dimmer B)With Dimmer When the LED driver power is greater than the emergency power (40W) A - With dimmer Connect to AC-N AC-N...
- Page 6 E) With Sensor (AC) D - With sensor (AC) AC-N Connect to AC-N Connect to AC-L AC-L Connect to Сharging Indicator- CHARGE INDICATOR- Connect to Test Switch TEST SWITCH Connect to CHARGING INDICATOR TEST SWTCH Сharging Indicator CHARGE INDICATOR Connect to AC-L out Wall Switch SENSOR...
- Page 7 HBF150W7XXDLP LHBC240 [1> EB40 is not Hazardous Location Rated. Must be remote mounted. The EB40 is compatible with all LED fixtures using less than 300W. All fixtures must also include 0-10V dimming. UL924 STATEMENT OF COMPLIANCE AND COMPATIBILITY PLEASE NOTE: When used with a sensor-equipped fixture from the Approved List of Litetronics fixtures...
- Page 8 This information is subject to change without notice and without incurring liability. If you have questions regarding specific product details, please contact us at 800-860-3392 or via email at customerservice@litetronics.com. To check for an updated version of these instructions, 11/2/22 - V2.3 please visit www.litetronics.com.
Need help?
Do you have a question about the EB40 and is the answer not in the manual?
Questions and answers