Lenovo ThinkPad X220 4298 User Manual page 210

Table 6. Config menu items (continued)
Menu item
Intel AMT
Security menu items
Table 7. Security menu items
Menu item
Password
Fingerprint
192
User Guide
Submenu item
Intel AMT Control
CIRA Timeout
Console Type
Submenu item
Predesktop Authentication
Reader Priority
Selection
• Disabled
• Enabled
0-255
• PC-ANSI
• VT100+
• VT-UTF8
Selection
• Disabled
• Enabled
• External ➙ Internal
• Internal Only
Comments
If you select "Enabled", Intel
AMT (Active Management
Technology) is configured
and additional setup items
are provided in MEBx
(Management Engine BIOS
Extension) Setup.
Note: You can enter MEBx
Setup menu by pressing
Ctrl-P key combination in
Startup Interrupt Menu. To
display the Startup Interrupt
Menu, press ThinkVantage
button or Enter key during
POST.
Set timeout option for
CIRA connection to be
established. 1 though 254
seconds are selectable.
If you select "0", use 60
seconds as default timeout
value.
If you select "255", waiting
time for establishing a
connection is unlimited.
Select the console type for
AMT.
Note: This console type
should match the Intel AMT
remote console.
Comments
Refer to "Security menu"
on page 183 and "Using
passwords" on page 89.
Enable or disable fingerprint
authentication before the
operating system is loaded.
If External ➙ Internal
is selected, an external
fingerprint reader is used
if attached. Otherwise, an
internal fingerprint reader
is used. If Internal Only
is selected, an internal
fingerprint reader is used.