GE PGP6030 Owner's Manual page 10

Cleaning the Cooktop (Cont.)
Burned-On Residue
NOTE: DAMAGE to your glass surface may occur if you
use scrub pads other than those recommended.
2. Spread a few drops of a ceramic cooktop cleaner on
the entire burned residue area.
cooktops, rub the residue area, applying pressure as
needed.
4. If any residue remains, repeat the steps listed above
as needed.
Heavy, Burned-On Residue
a 45° angle against the glass surface and scrape the
soil. It will be necessary to apply pressure to the razor
scraper in order to remove the residue.
3. After scraping with the razor scraper, spread a few
drops of a ceramic cooktop cleaner on the entire burned
any remaining residue.
4. For additional protection, after all residue has been
removed, polish the entire surface with a ceramic
cooktop cleaner and a paper towel.
Removal of Surface Burners for Cleaning
Turn all controls OFF. Allow cooktop to cool before removing grates and burner parts. When removing the burner
caps and heads, remember their size and location. Replace them in the same location after cleaning.
(Removable)
Electrode
Round Burner
Head
pins
5. For additional protection, after all residue has been
removed, polish the entire surface with a ceramic
cooktop cleaner and a paper towel.
The ceramic cooktop scraper and all recommended supplies
NOTE: Do not use a dull or nicked blade.
Electrode
base
Gas on Glass Burner
ceramic cooktops.
Cap
Cap
Electrode
Multi-Ring Burner
49-2001174 Rev. 0