Lenovo ThinkPad SL300 2738 Hardware Maintenance Manual page 82

Table 19. Removal steps of fan assembly (continued)
Table 20. Installation of the fan assembly
When installing:
v Before you attach the fan assembly to the computer, apply thermal grease, at an
v Make sure that the fan connector is attached firmly.
74
ThinkPad SL300 Hardware Maintenance Manual
5
amount of 0.2 grams, on the part marked a as in the following figure. Either
too much or too less application of grease can cause a thermal problem due to
imperfect contact with a component. For the new fan assembly, you need to peel
the thin film off from the rubber b .
a
b
6