Table of Contents
Advertisement
MDD102_62_ENG_5608
2/12/07
Connections
Connecting to Antenna
Connect the supplied FM/AM antennas to listen to the
radio.
• Connect the AM loop antenna to the AM antenna
connector.
• Connect the FM wire antenna to the FM antenna
connector.
For AM(MW) reception,
connect the loop antenna
(aerial) to the terminal marked AM
FM wire
antenna
(supplied)
Note
Note
• To prevent noise pickup, keep the AM loop antenna
away from the unit and other component.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.
10:41 PM
Page 7
AM(MW) loop
antenna (aerial)
(Supplied)
COMPONENT
VIDEO OUT
(PROGRESSIVE SCAN)
AUX IN
Connecting to Auxiliary Equipment
You can use VCR or other unit connected to the AUX
connector.
IN
OUT
VIDEO
VCR (or Auxiliary
AUDIO (L)
Device, etc)
AUDIO (R)
Connect a VCR or auxiliary device, etc to the AUX
1 1
connector.
Press the AUX button on the front panel or the
2 2
remote control until the "AUX" indicator is
displayed in the display window.
To AUDIO IN
To AUDIO OUT
7
Advertisement
Table of Contents
