Download Print this page
RusAutomation S80SOL Installation Instructions

RusAutomation S80SOL Installation Instructions

Solar rechargeable led flashing signal light

Advertisement

Quick Links

Solar Rechargeable LED Flashing Signal Light
S80SOL/ S100SOL/ S125SOL
25
50
54
Thank you for purchasing Qlight's products. Please read this user manual carefully prior to instal-
lation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to fire, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, fire, electric shock and loss of life.)
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product
that would void the warranty.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn off the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product's specification.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.
Ordering Specifications
S80SOL
-
[Model number]
|
• S80SOL
R-Red
A-Amber
• S100SOL
• S125SOL
Product Specifications
R
Model
number
[Color]
S80SOL
|
S100SOL
S125SOL
• Protection rating : IP54
• Ambient operating temperature : -25°C to +50°C
Continuous
Battery
Battery
operating time
voltage
capacity
with no charge
30Hr
2.4V
0.0700Ah
40Hr
50Hr
1
Certificate
Weight
Color
0.27kg
R-Red
0.41kg
A-Amber
0.51kg

Advertisement

loading
Need help?

Need help?

Do you have a question about the S80SOL and is the answer not in the manual?

Questions and answers

Summary of Contents for RusAutomation S80SOL

  • Page 1 Solar Rechargeable LED Flashing Signal Light S80SOL/ S100SOL/ S125SOL Thank you for purchasing Qlight’s products. Please read this user manual carefully prior to instal- lation and operation to ensure safe and correct use. Precautions for Safety Failure to follow the instructions below may cause a loss of life or serious physical injury.
  • Page 2 Dimensions (Units : mm) S80SOL S100SOL S125SOL Ø119 Ø101 Ø83 360˚/3- 360˚/3- 360˚/3- PCD 85 PCD 50 M5 BOL T M5 BOL T M4 BOL T PCD 60 Parts Definition/ Installation/ Light Function Selection ■ Parts Definition/ Installation ■ Light Function Selection ①...
  • Page 3 For further information, please visit our website (www.qlight.com). • Mounting Accessories (Sold Separately) • Please refer to the dimensions below for installation of mounting brackets Dimensions S80SOL TWS80 TWA80 S100SOL S125SOL SWP125 SWM125 ООО...

This manual is also suitable for:

S100solS125sol