Replacing the rear fan bracket assembly
This section provides instructions on how to replace the rear fan bracket assembly.
1. Open the computer cover. See "Opening the cover" on page 12.
2. Pivot the drive bay assembly upward to gain access to the rear fan bracket
3. Locate the rear fan bracket assembly. See "Locating components" on page 8.
4. Disconnect the rear fan cable from the system board. See "Identifying parts on
Attention
Do not open your computer or attempt any repair before reading the "Important safety
information" in the Safety and Warranty Guide that was included with your computer. To
obtain a copy of the Safety and Warranty Guide, go to the Support Web site at
http://www.lenovo.com/support.
assembly.
the system board" on page 9.
Note: Make sure you note the location of the rear fan cable when you
disconnect it from the system board.
Chapter 3. Installing options and replacing hardware
29