Related Manuals for OKIN ComfortBase
Summary of Contents for OKIN ComfortBase
- Page 1 OKIN Refined Electric Technology Co., Ltd Operating Manual of Remote Control system 1、 Interface of the remote control 2、Button description HEAD UP button：Press and hold the button, the Head actuator will go up. Stop when released. Page 1 of...
- Page 2 OKIN Refined Electric Technology Co., Ltd HEAD DN button：Press and hold the button, the Head actuator will go down. Stop when released. FOOT UP button：Press and hold the button, the Foot actuator will go up. Stop when released. FOOT DN button：Press and hold the button, the Foot actuator will go down. Stop when released.
- Page 3 OKIN Refined Electric Technology Co., Ltd stopped by clicking any button. The blue LEDs for backlight are on as long as any button is pressed. IF all buttons are released the LEDs will automatically turn off three seconds later. The blue LED for power is always on as long as the power on.
- Page 4 OKIN Refined Electric Technology Co., Ltd UNDERLIGHT button：Click the button, the Under-light under the bed will turn on if it is being off or turn off if it is being on. If the Under-light is turning on as the button pressed, it will keep on for 5 minutes then turn off automatically if the button isn’t pressed...
- Page 5 OKIN Refined Electric Technology Co., Ltd 500mS 500mS 350mS 350mS 200mS 200mS Continuous Note: ON time-----On vibrating OFF time-----Stop vibrating PS: If the vibrator has stopped, press any one of the four buttons of , the vibrator will start up in the intensity of level one and in the previous speed.
- Page 6 OKIN Refined Electric Technology Co., Ltd the pairing operating is completed. To test if the pairing successfully, press the Head-up or Head-down or Foot-up or Foot-down button， as so on, related to the actuators , if the click sound from the relays in the control box can be heard that means it is successful. Otherwise, repeat the all above steps.
- Page 7 OKIN Refined Electric Technology Co., Ltd The control box is designed for using the SMPS of 29VDC/ around 2A as the power. It is necessary to use the SMPS provided by us when normal operation. In the case of the AC power utility failure, the batteries for backup of 18VDC can be used as the power.
- Page 8 OKIN Refined Electric Technology Co., Ltd NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.