Husky ERPB4020B Quick Start Manual

Important Information

Before beginning assembly, read through the instructions and make sure all parts are present. Assemble this unit on a level
surface. Keep all parts away from children. Never leave a small child unattended while assembling this product. Always use
common sense - your personal safety is your responsibility. Use correct /recommended tools for the job. Use care when
assembling the metal parts - wear safety glasses and gloves. All parts and assembly instructions must be used as shown. Any
alterations or deviation from this instruction sheet can result in product failure. After product has been assembled, it must be
placed on a level surface. DO NOT JUMP ON OR STAND ON THIS PRODUCT AT ANY TIME, WHICH CAN RESULT IN PERSONAL
INJURY DUE TO FALLING OFF OR PRODUCT FAILURE. Keep this manual for future reference and periodically check unit to make
sure all parts and hardware are securely in place.
Items you might find helpful (not included):
Rubber mallet, phillips screwdriver, gloves, safety glasses

Contents

A
x 2
Upright Frame

Warranty

GUARANTEED FOREVER. If your Husky tool or storage unit ever fails bring it back and we will replace it for free. This full
warranty gives you specific rights which vary from state to state. If this product is defective contact the manufacturer for repair
or replacement parts.
Questions, problems, damage or missing parts? Contact Husky's partnered manufacturer for assistance:
Chat: www.edsal.com/chat or www.edsal.com/contact
Email: support@edsal.com
Phone: 773-475-3131
To obtain replacement parts please provide: Model Number, Part Number & Description, Location & Date of Purchase
PADDED STORAGE
40"W x 20"D x 20"H
B
x 4
Crossbeam
BENCH
C
x 1
Wire Deck
Item#: 1004151786
Model#: ERPB4020B
E
Screws
D
x 1
F
Cushion Seat
Washers
Edsal Manufacturing
1555 W. 44th Street
Chicago, IL 60609
Made in China
Rev: C021519_iti-R
x 4
x 4