Removing and replacing a FRU
1050 PCI Express Mini Card for 802.11 a/b/g/n wireless LAN
For access, remove these FRUs in order:
v "1010 Battery pack" on page 47
v "1020 Hard disk drive slot cover" on page 48
In step 2 , unplug the jacks by using the removal tool antenna RF connector
(P/N: 08K7159) or pick the connectors with your fingers and gently unplug them
in direction of the arrow.
When installing: Plug the white cable (MAIN) into the jack labeled n on the card,
50
MT 0689, 0690, and 0768
Step
Screw (quantity)
1
M2 × 4 mm, flat-head, nylon-coated (2)
and the black cable (AUX) into the jack labeled
1
1
2
3
Color
Black
Torque
0.245 Nm
(2.5 kgfcm)
on the card.